SciELO - Scientific Electronic Library Online

 
vol.68 número1Corrosion resistance evaluation of boron-carbon coating on ASTM A-36 steelMonte Carlo simulation of the measurement by the 2E technique of the average prompt neutron multiplicity as a function of the mass of fragments from thermal neutron-induced fission of 239Pu índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Revista mexicana de física

versión impresa ISSN 0035-001X

Resumen

KHETIR, M. et al. Elastic constants, electronic properties and thermoelectric response of LiAIX (X=C, Si, Ge, and Sn) half-Heusler compounds. Rev. mex. fis. [online]. 2022, vol.68, n.1.  Epub 23-Jun-2023. ISSN 0035-001X.  https://doi.org/10.31349/revmexfis.68.011002.

Since they have become indispensable in various technological applications and a powerful source for generating energy in thermoelectric devices, Lithium-based alloys are the central topic of many experimental and theoretical reports. Hence, LiAlX(X = C, Si, Ge, Sn) materials represent the main research in this study. Different interesting properties such as the effect of pressure on the band gaps as well as the elastic parameters and the thermoelectric efficiency of these materials were investigated using the full potential linearized augmented plane wave (FP-LAPW) method. LiAlX alloys were found to be semiconducting with indirect band gaps. When studying the mechanical properties, we realized that LiAlC alloy remains stable against a wide range of pressure changes (90 GPa), while the rest three systems preserve their mechanical stability in a moderate range of 40, 50 and 30 GPa, respectively. The semiconducting band gap for each possible transition have been calculated in a range of different pressures using both GGA and mBJ-GGA approximations. The results revealed a decaying trend of the indirect gap along Γ-X direction with increase of pressure. High values of the power factor were achieved and a large figure of merit (almost 0.7 for all systems) was calculated at 600 K, which makes these Li-based alloys very auspicious in the thermoelectric field applications.

Palabras llave : Lithium-based alloys; DFT; FPLAPW; elastic constants; electronic properties; thermoelectric response.

        · texto en Inglés     · Inglés ( pdf )