Resumo

MARQUEZ-HERRERA, A. et al. Calentador de sustratos compacto y de bajo costo para tratamiento térmico in situ de películas delgadas depositadas por rf-sputtering. Rev. mex. fis. [online]. 2010, vol.56, n.1, pp.85-91. ISSN 0035-001X.

In this work we present the design, construction and the evaluation of a low cost substrate heater for working at high vacuum. Its use concentrates in providing in-situ annealing during the growth of thin films under conditions of controlled pressure and corrosive atmosphere. The heater was constructed mainly of stainless steel, ceramic and a resistance of khantal-Al. The body of the heater is cooled using a system of fins and cooling liquid which is isolated completely of the vacuum chamber. The design of the heater also incorporates a rotation system that allows that the substrate turns during the process of growth providing uniformity to the film. Temperature of the substrate is recorded by a type "K" thermocouple which feeds back a temperature controller that provides a modulated voltage to the heating resistance. In order to evaluate the functionality of the heating system, this was mounted in a rf-sputtering equipment and thin films of BaTiO₃ were grown under different substrate temperatures in an off-axis geometry. The heating system is able to provide an uniform temperature to the substrate as well as to operate by long periods of times.

Palavras-chave : Thin films; annealing; heater system.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )