Resumo

KUBDE, P. W.  e  SANGLE, K. K.. Extension of direct strength method to two dimensional cold formed steel frame. Rev. ALCONPAT [online]. 2017, vol.7, n.2, pp.172-185. ISSN 2007-6835.  https://doi.org/10.21041/ra.v7i2.196.

The use of cold-formed steel (CFS) structures is increasing due to the advances in manufacturing, construction technologies and relevant standards. CFS has many advantages. However, the design of CFS structures is complex because of their thin walled open sections making them vulnerable to torsional-flexural buckling and local buckling. Direct strength method (DSM) is the method available for individual beam and column, with certain limitations. To overcome one such limitation this paper attempts to find a formula as an extension to DSM. Already experimented frame was used to validate software model and same frame with different heights was analysed by Finite Element Method and DSM and a formula is obtained as an extension to DSM.

Palavras-chave : cold formed steel; distortional buckling; global buckling; direct strength method; finite element analysis.

        · resumo em Português | Espanhol     · texto em Português | Espanhol | Inglês     · Português ( pdf ) | Inglês ( pdf ) | Espanhol ( pdf )