Study contribution
Mexican beekeeping is seriously threatened by the presence of adulterated and fake honey in the market. At the field level, the determination of honey quality is only measured with °Brix. The sugar content in honey is a fundamental parameter that determines its authenticity and the degree of adulteration or falsification. Bee honey must contain ≥ 60 g 100 g-1 of fructose + glucose, ≤ 5 g 100 g-1 of sucrose and the Fructose/Glucose ratio must be greater than 1. With the results of this study, it was determined that the °Brix reading in honey is not enough to determine its authenticity. With the results of this study, it is possible to contribute both to the sustainability and profitability of beekeeping in Mexico and to the health care of honey consumers.
Introduction
Bee honey is a sweet natural substance produced by worker bees from flower nectar and other extrafloral secretions that bees suck, transport, transform, combine with other substances, dehydrate, concentrate and store in honeycombs.1,2 The characteristics of honey vary according to botanical and geographic origin, the climatic conditions where it is produced, and how it is processed and stored.3 The main components of honey are carbohydrates and water.3 Sugars such as fructose, glucose and sucrose are the main carbohydrates present in honey, and together they constitute 95 to 99% of honey’s dry matter.4 Bee honey also contains other disaccharide carbohydrates such as maltose, isomaltose, oligosaccharides, and tetrasaccharides.5 Furthermore, bee honey contains various minor substances, including enzymes, amino acids, organic acids, antioxidants, vitamins, and minerals.6
Any product that does not comply with those mentioned above cannot be called honey, as with sugar syrups and plant syrup. Also, honey must not contain additives, organic and inorganic substances different from its composition.7
The total soluble solids content in honey is expressed in degrees Brix (°Brix), related to the sugar content. The °Brix value obtained using the refractometer represents the percentage of sugars in honey. This parameter is related to the moisture content since the second most abundant honey component is water, which is expressed as a percentage of moisture in honey.8
Based on this background, this research determined and compared the composition of sugars and degrees Brix (°Brix) in honey from Apis mellifera and Melipona beecheii bees from various Mexican states, in addition to a product commercialized as bee honey in the local market.
Materials and methods
Honey samples collection
The honey samples from Apis mellifera and Melipona beecheii were collected from different states of Mexico and from various botanical sources, depending on the site where they were collected (Table 1).
Region1 | State2 | Bee species | n3 | Botanical source4 |
Humid tropic | Campeche | Apis mellifera | 2 | Multifloral |
Quintana Roo | Apis mellifera | 1 | Multifloral | |
Yucatán | Apis mellifera | 1 | Multifloral | |
Yucatán | Melipona beecheii | 2 | Multifloral | |
Chiapas | Apis mellifera | 2 | Multifloral | |
Dry tropic | Oaxaca | Apis mellifera | 2 | Chalahuite (Inga vera) and multifloral |
Guerrero | Apis mellifera | 3 | Coconut (Cocos nucifera) and multifloral | |
Guerrero | Melipona beecheii | 1 | Multifloral | |
Temperate | Puebla | Apis mellifera | 3 | Mezquite (Prosopis velutina), acahual (Tithonia tubiformis) and palo dulce or palo azul (Eysenhardtia polystachya) |
Estado de México | Unknown | 3 | Unknown origin |
1Region: climatic region of Mexico, 2State: a state within Mexico, 3n: number of honey samples, 4Botanical source: the floral origin of honey samples.
Once the honey was extracted from the different hives, a sample of 250 g of mixed honey was taken. We had twenty samples of honey (14 from Apis mellifera, three from Melipona beecheii, and three from a product marketed locally as bee honey). To obtain the samples from the local market, three 250 g glass containers filled with honey from three different establishments known for offering honey were chosen.
Laboratory analysis
The determination of °Brix was made with decrystallized honey using a refractometer at a temperature of 22 °C. Highperformance liquid chromatography (HPLC) was used to determine sugars with a refractive index detector. The samples were analyzed in triplicate for sugars and in quadruplicate for °Brix.
The reagents used were acetonitrile, methanol, water, and standards for glucose, fructose, and sucrose; all reagents were of HPLC grade. The materials and equipment used were 1.8 mL glass vials, 10 and 5 mL ‘class A’ volumetric flasks, 47 mm and 0.47 µm NYLON filtration membranes, SPE Chromabond C18 ec 3 mL 500 mg-1 cleaning cartridges, acrodisks 0.47 µm, vacuum filtration system, analytical balance and 5 mL plastic syringe.
The procedure followed was the preparation of 40 mL methanol:water solution A (1:9). The mobile phase was acetonitrile:water (80:20). For the standard solution (DP), 0.1 g of glucose, fructose and sucrose standards were weighed; they were all placed together in a 10 mL flask, dissolved with solution A and brought to gauge, reaching the concentration of 10 mg mL-1. To determine the retention time of each standard, 0.1 g of each was weighed individually. For the standard solution, 5 mL of DP was transferred to a 10 mL flask, and it was filled with the mobile phase until reaching the concentration of 5 mg mL-1.
The three previous standards were injected into the HPLC to determine the retention time of fructose, glucose, and sucrose. A calibration curve of 0.3 to 5 mg mL-1 was used to quantify sugars in the honey samples analyzed.
The honey samples’ preparation was carried out using the procedure described by Karkacier et al.9 One gram of each sample was weighed on an analytical balance. The sample was diluted with HPLC grade water, transferred to a 10 mL volumetric flask, and gauged with the same water. Subsequently, 1 mL of the solution was taken, transferred to a 10 mL flask, and washed with HPLC water.
For the solidphase extraction, the MachereyNagel technique was used to clean the honey sample through cartridge filtration or a cleaning column placed on a universal support.10 The vacuum was generated with a 5 mL syringe’s help, attached to a particular hose extension. The cleaning cartridge was conditioned with 6 mL of methanol and then 6 mL of HPLC water at the rate of one drop per second. The methanol was recovered and placed in a toxic waste container. Care was taken to ensure that the chromatographic bed did not dry at each stage.
Once the cleaning cartridge was conditioned, 1 mL of the honey samples’ ultimate solution was deposited inside the cartridge. The sample was sucked without drying the chromatographic bed, and the eluate was recovered in a 5 mL flask; 3 mL of HPLC water was added to the column to recover the sugars and mixed with the above eluate. In this last step, the chromatographic bed was brought to dryness. Subsequently, the flask was washed with HPLC water. Finally, 1 mL of the solution resulting from the solid phase extraction was taken, passed through an acrodisk, and placed in the HPLC’s autosampler vial for analysis.
Statistical analyses
The MEANS procedure was used to obtain the descriptive statistics, and the SAS MIXED procedure was used to analyze variance and covariance.11 For the variables of sugar concentration (fructose, glucose, fructose + glucose), the ratio of fructose:glucose (F:G) and °Brix, the adjusted statistical model was as follows:
Where: y
ijk
is the registered value for each one of the analyzed variables (fructose, glucose, fructose + glucose, F:G ratio, and ° Brix); µ is the overall mean;
S
i
is the effect of the i
-th
species of bee (i = Apis mellifera, Melipona beecheii, and unknown); EF
j
is the random effect of the j
-th
subclass, formed by the combination of the Mexican State where the honey samples were collected and the type of flowering origin of the honey analyzed;
The association between °Brix and the concentrations of fructose, glucose, fructose + glucose, and the F:G ratio was analyzed only for Apis mellifera and Melipona beecheii because they had more quality available data. For each sugar content variable in honey, the °Brix reading relationship was analyzed by fitting a mixed linear model without the overall mean, using the ‘noint’ option in the model statement. Likewise, the solution to the model’s fixed effects was obtained by specifying the ‘solution’ option in the SAS MIXED procedure’s model statement.11 The fixed effect solutions corresponded to coefficients of °Brix regression on the concentration of each modeled sugar in honey. The adjusted statistical model is as follows:
Where: y
ijk
is the k
th
record of °Brix, from the i
-th
bee species, and the j
-th
subclass formed by the combination of Mexican State and the type of flowering origin of the honey; β
0i
,
β
1i
, and
β
2i
are, respectively, the regression coefficients for the intercept, and the linear and quadratic slopes of the regression of °Brix on each independent variable analyzed, for the i
-th
bee species; EF
j
is the random effect of the j
-th
subclass formed by the combination of Mexican State and the type of flowering origin of the honey
Results and discussion
Table 2 shows the average sugar concentrations and °Brix readings for the honey analyzed. According to the Official Mexican Standard NMX-F-036- NORMEX-2006,2Apis mellifera, and Melipona beecheii honey met the specifications of 63.88 g 100 g-1 of honey as a minimum for fructose + glucose values and a maximum glucose concentration of 38 g 100 g-1 of honey. However, the sugar concentration in the product marketed in the local market as honey was lower than that specified by the Mexican standard. For sucrose, no detectable levels were found in any sample analyzed. According to the Codex Alimentarius,1 the honey analyzed from the two species of bees met the specifications regarding the concentration of sugars (fructose + glucose) greater than 60 g 100 g-1 of honey and sucrose less than 5 g 100 g-1 of honey.
Bee species/Variable | n1 | Min. | Max. | Mean | SD2 | CV3 (%) |
Apis mellifera | ||||||
Fructose (g 100 g-1 honey) | 42 | 31.9 | 41.6 | 36.4 | 2.49 | 6.56 |
Glucose (g 100 g-1 honey) | 42 | 21.4 | 38.7 | 28.9 | 4.36 | 15.08 |
Fructose + glucose (g 100 g-1 honey) | 42 | 53.4 | 77.5 | 65.2 | 6.05 | 9.28 |
Fructose:glucose ratio | 42 | 1.0 | 1.6 | 1.3 | 0.17 | 12.91 |
°Brix | 56 | 76.7 | 81.5 | 79.3 | 1.30 | 1.64 |
Melipona beecheii | ||||||
Fructose (g 100 g-1 honey) | 9 | 36.6 | 40.0 | 38.5 | 1.20 | 3.11 |
Glucose (g 100 g-1 honey) | 9 | 25.1 | 32.1 | 28.2 | 2.69 | 9.51 |
Fructose + glucose (g 100 g-1 honey) | 9 | 62.4 | 71.7 | 67.7 | 3.72 | 5.50 |
Fructose:glucose ratio | 9 | 1.24 | 1.5 | 1.4 | 0.10 | 6.93 |
°Brix | 12 | 72.5 | 80.4 | 76.0 | 3.03 | 3.99 |
Unknown honey bee especies 4 | ||||||
Fructose (g 100 g-1 honey) | 3 | 7.0 | 7.9 | 7.5 | 0.46 | 6.21 |
Glucose (g 100 g-1 honey) | 3 | 16.9 | 17.1 | 17.0 | 0.13 | 0.76 |
Fructose + glucose (g 100 g-1 honey) | 3 | 24.1 | 25.0 | 24.5 | 0.43 | 1.76 |
Fructose:glucose ratio | 3 | 0.4 | 0.5 | 0.4 | 0.03 | 6.52 |
°Brix | 4 | 81.1 | 81.4 | 81.3 | 0.13 | 0.16 |
1n: number of observations, 2SD: standard deviation, 3CV: the coefficient of variation, 4Unknown honey bee species: product sold as bee honey in the local market.
The NMX-F-036-NORMEX-2006 and Codex Alimentarius standards are specific for Apis mellifera honey. There is no standard for honey from Melipona beecheii. Although the content of fructose and glucose in Melipona beecheii honey found in this study is within these standards’ specifications, there could be one or more components in Melipona beecheii honey that do not comply with these standards. Thus, it is necessary to establish a standard that regulates the quality of honey from Melipona beecheii.
The fructose content in the honey of Apis mellifera and Melipona beecheii was not different (P < 0.05); however, the fructose content was 79 and 80 % higher than that found in the product marketed as bee honey in the local market. The glucose content was different (P < 0.05) for the three types of honey analyzed. Honey from Melipona beecheii had 9 % higher glucose content than Apis mellifera, and the latter had 42 % higher glucose concentration than the product marketed as honey in the local market (Figure 1).
The sugar content in the honey of Apis mellifera was slightly lower than that reported by Olaitan et al.4 (38.2 % fructose and 31.3 % glucose), which was lower than that reported by Belay et al.11 (39.2 and 32.9 % for fructose and glucose, respectively). Similarly, the glucose content was lower than that reported by Tigistu et al.12 (32.61 %). El Sohaimy et al.13 reported a wide range of fructose content (4.8 to 50.78 %) and glucose (10.63 to 26.54 %) in honey from Apis mellifera from different geographical locations. On the other hand, de Almeida Muradian et al.5 reported higher fructose and glucose concentrations in Apis mellifera honey (38.78 and 23.50 %, respectively) than in Melipona beecheii honey (29.21 and 21.76 %), which was different from what was found in this study. In Brazil, de Almeida-Muradian et al.14 found concentrations of fructose and glucose in Melipona beecheii honey of 31.61 and 29.33 %, which were lower than what was found in this study. Similarly, Fonte et al.15 reported fructose and glucose concentrations of 34.11 and 29.30 in honey from Melipona beecheii.
The concentration of fructose + glucose was different (P < 0.05) in the honey analyzed, with honey from Melipona beecheii having the highest concentration. The lowest concentration of fructose + glucose was presented by the product marketed as honey in the local market. However, Apis mellifera honey presented the highest F:G ratio of the three compared honeys (Figure 2). The sum of fructose + glucose in Melipona beecheii honey found in this study coincides with that reported by MooHuchin et al.16 (67.7 g 100 g-1 of honey). In a study of Apis mellifera honey from different geographical origins, El Sohaimy et al.13 found a range of 64.21 to 72.36 g 100 g-1 of honey for the sum of fructose + glucose. This result agrees with that found in this study. In contrast, Tigistu et al.12 reported fructose + glucose content of 66.83 g 100 g-1 of honey, which was slightly higher than that found in this study for Apis mellifera honey.
According to international standards for Apis mellifera honey for export to the European Union, the F:G ratio’s value must be greater than 1.18 In Brazil, de AlmeidaMuradian et al.14 reported a value of 1.12 for the F: G ratio in Melipona beecheii honey; this value was lower than what was found in this study for both bee species. For Apis mellifera honey, Tigistu et al.12 found an F:G ratio of 1.05. For honey with different botanical origins, Belay et al.11 reported an average value for the F:G ratio of 1.19. Both values were lower than those observed in the study. For Apis mellifera honey, El Sohaimy et al.13 obtained values for the F:G ratio ranging from 0.42 to 2.35. The lowend values were to those registered in this study for the product marketed as bee honey in the local mark.
According to Apis mellifera honey standards, regarding the content of the sugars analyzed in this study and the F:G ratio, the product marketed as honey on the local market does not meet the international standards for being considered authentic bee honey. More detailed studies must determine the composition and origin of this product. Figure 2 shows that the fructose + glucose concentration and the F:G ratio are 59 and 56 % lower than the minimum values specified in the standards. For °Brix (Figure 3), Apis mellifera honey was not different (P < 0.05) from the product marketed as bee honey in the local market. Melipona beecheii honey was the one with the lowest °Brix reading.
The soluble solids content (°Brix) in the analyzed honey was similar to that reported by López et al.18 in Apis mellifera honey (78.7 to 84.3 °Brix), and agrees with the range of 78.5 to 81.37 °Brix reported by Tapia-Campos et al.19 Damasceno do Vale et al.20 found values of 67.5 °Brix in honey from Melipona beecheii bees, which was lower than what was found in this study; while, Moo-Huchin et al.16 reported for °Brix an average value of 75.1, similar to that found in this study. The low °Brix value in honey from Melipona beecheii was possibly due to its higher moisture content than Apis mellifera. Damasceno do Vale et al.20 reported an average moisture percentage of 38.5 % in honey from Melipona beecheii bees, ranging from 27.7 to 45.8 %. In contrast, in a literature review, Machado DeMelo et al.3 found a range of 13 to 25 % for the moisture content in honey from Apis mellifera.
For honey from Melipona beecheii, in other studies, Fonte et al.15 reported moisture values of 24 %, MooHuchin et al.16 of 23.2 %. Both studies conclude that, except for moisture content, for Melipona beecheii honey, the same compositional standards for Apis mellifera honey can be applied.
Based on the analyzed honey results, as there were no differences in °Brix between Apis mellifera honey and the product marketed as honey on the local market, it is not convenient to use this parameter to determine the authenticity of the honey from the local market.
Figure 4 shows the effect of fructose and glucose concentrations on the soluble solids content (°Brix) for the honey of Apis mellifera and Melipona beecheii. For Apis mellifera honey, as fructose increases, the °Brix value decreases linearly; however, the °Brix value displays a quadratic trend as glucose increases. In honey from Melipona beecheii bees, as both sugars increased in honey, the °Brix value decreased.
Figure 5 shows the effect of the fructose + glucose concentration and the F:G ratio on the soluble solids content (°Brix) for the honey of Apis mellifera and Melipona beecheii. In both bee species, the °Brix in honey decreased as the fructose + glucose concentration increased, contrary to the F:G ratio increases.
Conclusions
The concentrations of fructose, glucose, and the sum of both in the honey of Apis mellifera and Melipona beecheii complies with the specifications of the NMX-F036-NORMEX-2006 and Codex Alimentarius standards, while the product marketed as bee honey in the local market does not meet these standards. For the fructose: glucose ratio, honey from Apis mellifera and Melipona beecheii meets the honey export standards for the European Union. According to the results of this study, honey from Apis mellifera and Melipona beecheii can be considered as authentic honey. In contrast, the product marketed as honey in the local market does not meet the standards for sugar concentration and the fructose:glucose ratio, and its authenticity cannot be guaranteed.
Data availability
All relevant data are within the manuscript.
Acknowledgments
The authors appreciate the National Council of Science and Technology for the first author’s scholarship during her doctoral studies.
Conflicts of interest
The authors have no conflict of interest to declare regarding this publication.
Author contributions
T Castillo: Conceptualization, data curation, formal analysis, investigation, methodology, resources, validation, writing - original draft and writing- review and editing.
C García: Conceptualization, methodology and resources.
JG García: Conceptualization, formal analysis, methodology and writing- review and editing.
J Aguilar: Conceptualization and writing- review and editing.
R Ramírez: Conceptualization and writing- review and editing.