Resumo

CARDENAS-SOTO, Martín et al. Ambient seismic noise tomography to build up a 3D shear-wave velocity model. Ing. invest. y tecnol. [online]. 2021, vol.22, n.2.  Epub 30-Jul-2021. ISSN 2594-0732.  https://doi.org/10.22201/fi.25940732e.2021.22.2.009.

To explore the usefulness of the ambient seismic noise tomography method for characterizing the subsoil surface structure, in this study, we apply this method to contribute to geotechnical decision-making in the construction of a school building. We used a rectangular array (36 x 56 m) of 48-4.5 Hz vertical geophones and produce surface wave tomographies from the travel times of Rayleigh waves extracted by cross-correlation of seismic noise. We determined a final 3D Vs model using 1D models derived from the inversion of dispersion curves obtained from the tomography maps for different frequencies. The 3D model shows an excellent resolution (vertical and lateral); we observe critical velocity contrasts in the range of 2 to 15 m deep. At depths higher than 15 m, the velocity has values close to 900 m/s; however, we observe a low-velocity anomaly associated with a lava tube or crack that seems to continue under an adjacent building.

Palavras-chave : Seismic interferometry; surface waves; site characterization; HVSR; lava tubes.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )