Resumo

BARRANCO-GUTIERREZ, Alejandro-Israel; SANDOVAL-GALARZA, Jesús  e  MARTINEZ-DIAZ, Saúl. Camera as Position Sensor for a Ball and Beam Control System. Comp. y Sist. [online]. 2015, vol.19, n.2, pp.273-282. ISSN 2007-9737.  https://doi.org/10.13053/CyS-19-2-1931.

This paper describes a novel strategy to use a digital camera as a position sensor to control a ball and beam system. A linear control law is used to position the ball at the desired location on the beam. The experiments show how this method controls the positioning of the ball in any location on the beam using a camera with a sampling rate of 30 frames per second (fps), and these results are compared with those obtained by using an analog resistive sensor with a feedback signal sampled at a rate of 1000 samples per second. The mechanical characteristics of this ball and beam system are used to simplify the calculation of the ball position using our vision system, and to ease camera calibration with respect to the ball and beam system. Our proposal uses a circularity feature of blobs in a binary image, instead of the classic correlation or Hough transform techniques for ball tracking. The main control system is implemented in Simulink with Real Time Workshop (RTW) and vision processing with OpenCV libraries.

Palavras-chave : Computer vision; ball and beam system; linear control.

        · texto em Inglês     · Inglês ( pdf )