Resumen

DATTA, Subir; MISHRA, J. P.  y  ROY, A. K.. Grid connected DFIG based wind energy conversion system using nine switch converter. J. appl. res. technol [online]. 2019, vol.17, n.4, pp.258-271.  Epub 28-Feb-2021. ISSN 2448-6736.  https://doi.org/10.22201/icat.16656423.2019.17.4.859.

In this paper, an attempt is made to develop a speed sensor DFIG-based grid-connected Wind Turbine (WT) system with Nine switch converter (NSC) instead of Back-to-back converter (B2BC). The NSC has the merits of reduced number of switching devices and cost, more efficient and reduced installation area over B2BC. A new control scheme, with the use of rotor speed sensors from generator, is proposed for NSC to track the maximum power point (MPP) by controlling the active power flow between rotor and grid under varying wind velocity at unity power factor (UPF). Furthermore, 120˚ discontinuous modulation scheme is also incorporated with proposed control scheme to minimize switching losses of the system. The complete study system has been simulated in MATLAB/Simulink platform and all the simulation results are analyzed in details to study the performance of the system. Simulation results illustrate that the NSC based WT system and its proposed control scheme can work at its optimum power level for an extensive range of wind velocity and also competent to achieve independent control on flow of both active and reactive powers.

Palabras llave : DFIG; NSC; Discontinuous Mode of Operation; and WT system.

        · texto en Inglés     · Inglés ( pdf )