SciELO - Scientific Electronic Library Online

 
vol.30 número1Espectrometría Raman y microtermometría de inclusiones fluidas en cuarzo magmático e hidrotermal en los pórfidos de Cu-Mo de Lucy y María, Sonora, MéxicoAcumulación de carbono orgánico total y carbonato de calcio en la zona de oxígeno mínimo del Pacífico nororiental mexicano índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Revista mexicana de ciencias geológicas

versión On-line ISSN 2007-2902versión impresa ISSN 1026-8774

Resumen

VERMA, Mahendra P.. Steam transport simulation in a geothermal pipeline network constrained by internally consistent thermodynamic properties of water. Rev. mex. cienc. geol [online]. 2013, vol.30, n.1, pp.210-221. ISSN 2007-2902.

A computer program, GeoSteamNet, for the numerical simulation of steam transport in geothermal pipeline networks is written in Visual Studio .NET. The program considers (a) internally consistent thermodynamic properties of water, and (b) a numerical algorithm based on the principles of conservation of mass, linear momentum (Newton's second law), and energy (the first and second laws of thermodynamics). Instability in the algorithm is observed as a consequence of ideal gas behavior of steam at low pressure, which is resolved by setting the lower limit ofpressure to 2.0×105 Pa. An ActiveX control, SteamTablesGrid, is used to calculate the thermodynamic properties of water. A study of the interrelationship among thermodynamic state variables like temperature, pressure, volume, internal energy, etc. indicates the internal consistency in the thermodynamic properties of steam only. The application of GeoSteamNet is demonstrated in the management and optimization of steam flow in a hypothetical geothermal power plant with two wells and one production unit. GeoSteamNet calculates all the parameters like fluid velocity, different types of energies such as heat loss, mechanical (kinetic and potential) energy, thermal energy, frictional energy, and total energy. Thus, the mass, linear momentum and energy balances at each nodal point in the pipeline network are used to validate the algorithm. Additionally, the computer program can also be used efficiently in the design and construction of geothermal pipeline network.

Palabras llave : steam flow; numerical simulation; SteamTablesGrid; GeoSteamNet; PipeLine; Visual Studio .NET.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons