Scielo RSS <![CDATA[Agricultura técnica en México]]> http://www.scielo.org.mx/rss.php?pid=0568-251720070002&lang=en vol. 33 num. 2 lang. en <![CDATA[SciELO Logo]]> http://www.scielo.org.mx/img/en/fbpelogp.gif http://www.scielo.org.mx <![CDATA[<b>Osmotic conditioning of husk tomato seeds</b>]]> http://www.scielo.org.mx/scielo.php?script=sci_arttext&pid=S0568-25172007000200001&lng=en&nrm=iso&tlng=en Con el objetivo de evaluar el efecto del acondicionamiento osmótico sobre la calidad fisiológica de semillas de tomate de cáscara, se realizó un experimento en el Laboratorio de Análisis de Semillas del Colegio de Postgraduados en Montecillo, Estado de México, México, en el período septiembre de 2004 a mayo de 2005. La semilla de tomate de cáscara cv. Rendidora fue osmoacondicionada con KNO3, KCl y polietilen glicol-8000 a -5, -10, -15 y -20 atm durante 48, 72 y 96 h y posteriormente se almacenó durante 0, 7, 90 y 180 días. Los parámetros evaluados fueron: porciento de germinación, plántulas anormales, semillas latentes y semillas muertas, tiempo para alcanzar 50% de germinación y peso seco de plántula. El efecto del acondicionamiento osmótico sobre las variables de germinación varió en función del agente osmótico y su potencial, y la duración del tratamiento. El almacenamiento favoreció el porciento de germinación y redujo el de semillas latentes. El acondicionamiento osmótico con KCl a -15 atm durante 48 h o con KNO3 a -20 atm durante 48 h, mejoraron la calidad fisiológica de la semilla de tomate de cáscara cv. Rendidora, efecto que persistió hasta por 180 días después del tratamiento.<hr/>The objective of this study was to evaluate the effect of osmopriming on the physiological quality of husk tomato seeds. The experiment was carried out at the Seed Analysis Laboratory of the Colegio de Postgraduados at Montecillo, State of Mexico, Mexico, during September 2004 to May 2005. Husk tomato seeds of cv. Rendidora were osmoprimed with KNO3, polyethylene glycol 8000 and KCl as osmotic agents, at -5, -10, -15 and -20 atm during 48, 72 and 96 h. After primed, the seeds were stored during 0, 7, 90 and 180 days in order to evaluate the persistence of the osmopriming treatments. Seed physiological quality was evaluated by determining the percentage of germination, abnormal seedlings, latent seeds, death seeds, time to reach 50% germination and seedling dry weight. The osmopriming effects depended on the osmotic agent, the osmotic pressure and the duration of the treatment. Seed storage after osmopriming increased germination and reduced the percentage of latent seeds. Osmopriming with KCl at -15 atm during 48 h or with KNO3 at -20 atm during 48 h improved the physiological quality of husk tomato seeds cv. Rendidora, improvement that persisted up to 180 days after treatment. <![CDATA[<b>Physiological quality and physical damage of maize seeds subjected to impact</b>]]> http://www.scielo.org.mx/scielo.php?script=sci_arttext&pid=S0568-25172007000200002&lng=en&nrm=iso&tlng=en El daño por impacto a la semilla de maíz es causa de baja calidad física, fisiológica y sanitaria. En este estudio, realizado en el Laboratorio de Análisis de Semillas del Colegio de Postgraduados, Montecillo, Estado de México, México en 2005, se evaluó el daño causado por impacto y envejecimiento acelerado sobre la calidad física y fisiológica de semillas de maíz. Se tomaron muestras de semilla de la porción apical, media y basal de mazorca del híbrido HS-2 con 10 y 23% de contenido de humedad. Éstas se colocaron en una plataforma con el embrión hacia arriba y fueron impactadas con una pieza cilíndrica de hierro de 243 g por caída libre de la misma, equivalente a 0.000, 0.141, 0.188 y 0.235 J. Parte de las semillas impactadas se sometieron a envejecimiento acelerado y se determinó la calidad física y fisiológica. La mayor calidad se observó en las semillas con 23% de humedad de las porciones central y basal de mazorca. Las semillas impactadas con 10 y 23% de humedad mostraron 34 y 25% sin daño visible, 80 y 69% de germinación estándar, 74 y 40% de germinación después del envejecimiento acelerado y 23 y 53 (µScm-1 de conductividad eléctrica (pérdida de electrolitos por gramo de semilla), respectivamente. Para las semillas ubicadas en las porciones apical, media y basal, los porcentajes de semillas sin daño visible fueron de 25, 31 y 31%; el porciento de germinación estándar fue de 62, 82 y 81, la tasa de germinación posterior al envejecimiento acelerado fue de 30, 74 y 80%, y la conductividad eléctrica fue de 54, 25 y 23 (µcm-¹. Los porcentajes de semillas dañadas y la disminución en la calidad fisiológica observados fueron relativamente proporcionales a la energía de impacto aplicada, a excepción de la tasa de germinación.<hr/>Damage caused by physic impacts diminishes the physical and physiological quality of corn seeds. The object of this study was to evaluate the damage caused by an impact and an accelerated ageing test on the physical and physiological quality of corn seeds. The experiment was performed in the Seed Analysis Laboratory at the Colegio de Postgraduados, Montecillo, State of Mexico, Mexico in 2005. Seed samples from the apical, middle and basal portion of the cob were collected with 10 and 23% of moisture content. The seeds were placed on a table with the embryo upward and impacted by the free falling of an iron 243 g cylinder equivalent to 0.000, 0.141, 0.188 and 0.235 J; subsequently, half of the seeds were subjected to an accelerated ageing test. The highest physical and physiological quality was observed in seeds with 23 % of moisture content and from the middle and basal positions of the cob. In seeds impacted at 23 and 10% of moisture content, the percentages observed without visible damage were 34 and 25, standard germination percentages 80 and 69, germination after accelerated ageing test was 74 and 40% and the electrolyte loss (electrical conductivity per gram of seed) were 23 and 53 (µScm-1, respectively. In seeds from the apical, middle and basal portion, the percentages of seeds without visible damage were 25, 31 and 31%, standard germination 62, 82 and 81%, germination after accelerated ageing test 3 0, 74 and 80% and electrolyte loss 54, 25 and 23 (µScm-1, respectively. The percentages of seed damaged and the reduction of physiological quality were proportional to the impact applied, except for germination rate. <![CDATA[<b>Participatory development of maize synthetic hybrids and seed production by framers</b>]]> http://www.scielo.org.mx/scielo.php?script=sci_arttext&pid=S0568-25172007000200003&lng=en&nrm=iso&tlng=en Un grupo de agricultores de la región productora de maíz del municipio de Santa María del Oro, Nayarit, México, aplicó el modelo productor-experimentador (P-E) para desarrollar semilla híbrida de maíz para auto abasto y reducir costos de producción. El modelo P-E es un proceso participativo entre productor e investigador, en el que se realiza investigación, transferencia de tecnología y adopción. Las actividades se llevaron a cabo de 1996-2000 en la comunidad de Buckingham y otras aledañas. En 1996 los productores sembraron diez híbridos comerciales de maíz para compararlos con dos híbridos sintéticos obtenidos de cruzas entre híbridos comerciales F1. Las características agronómicas superiores de los híbridos sintéticos y su alto rendimiento motivo a los agricultores a producir ocho nuevos híbridos sintéticos a partir de cruzamientos entre los híbridos comerciales: HV-313, D-880, C-385 en F2, P-3028, A-7573, D-867 y Ciclón. Los productores seleccionaron un nuevo híbrido al que denominaron B-2002, cuyo rendimiento fue similar al de los híbridos comerciales cultivados en la región: P-3028, A-7573 y H-359; por lo que la semilla del B-2002 tuvo una creciente demanda. En 1998, 1999 y 2000 se sembraron 1000, 1500 y 3500 ha, respectivamente. La aplicación del modelo productor-experimentador demostró que, con asesoría del investigador, los productores están aptos para desarrollar híbridos sintéticos de maíz a partir de híbridos comerciales y producir su propia semilla a un menor costo en comparación con la de híbridos comerciales.<hr/>The model 'Farmer-Researcher' (F-R) was applied by a group of farmers in Santa María del Oro, Nayarit, Mexico with the aim of developing their own maize hybrids and its seed production, in order to reduce production costs. The F-R model is a participatory process between farmers and researchers that involves research, technology transfer and adoption activities. The model was applied during 1996-2000 at Buckingham and neighborhood communities. In 1996, the farmers compared 10 commercial maize hybrids with two synthetic hybrids obtained from crosses between commercial F1 hybrids. The agronomic characteristics and yield shown by the synthetic hybrids convinced the farmers to form eight new synthetic hybrids from crosses among the commercial hybrids: HV-313, D-880, C-385 in the generation F2, P-3028, A-7573, D-867 and Ciclón. The farmers selected one hybrid and named it B-2002. The performance of B-2002 was similar to the best commercial hybrids sown at the region: P-3028, A-7573 and H-359; therefore, the seed of B-2002, produced by farmers, had an increasing demand. In 1998, 1999 and 2000, B-2002 was used in 1000, 1500 and 3500 ha, respectively. The application of the farmer-researcher model demonstrated that farmers, advised by a researcher, were able to develop maize hybrids and to produce their own seed at a lower cost than the commercial hybrid seed. <![CDATA[<b>Yield and nitrogen, phosphorus and potassium uptake of forage maize in narrow rows</b>]]> http://www.scielo.org.mx/scielo.php?script=sci_arttext&pid=S0568-25172007000200004&lng=en&nrm=iso&tlng=en El rendimiento y extracción de nutrimentos de maíz forrajero pueden incrementarse con la siembra en surcos estrechos, a menor distancia que los convencionales a 76 cm. El objetivo fue determinar el efecto de la distancia entre surcos sobre el rendimiento de materia seca y cantidad acumulada de N, P y K en maíz cv. 3025W. El estudio se realizó durante 1999 y 2000 en el Campo Experimental La Laguna, Matamoros, Coahuila, México (25° 32' N, 103° 14' O, y 1150 msnm). Se evaluaron cuatro distancias entre surcos: 38, 50 y 76 cm con plantación a hilera sencilla y camas de 105 cm a doble hilera, todos con una densidad de 11.2 plantas m². Se utilizó un diseño de bloques completos al azar con cuatro repeticiones. Se determinó el rendimiento de grano, materia seca total y su distribución en los órganos de la planta, índices de cosecha y área foliar y cantidad de N, P y K acumulado en materia seca. El rendimiento de materia seca obtenido en surcos a 38 cm y en camas a 105 cm, fue 14 y 17% mayor al testigo a 76 cm, respectivamente, lo cual se relacionó con mayor índice de área foliar y mayor acumulación de materia seca en los órganos vegetativos, sin reducción significativa en el índice de cosecha. En comparación con el testigo, la extracción de N y K en surcos a 38 cm se incrementó en 36 y 93 kg ha-1, respectivamente, debido al aumento de rendimiento de materia seca.<hr/>Planting on narrower rows rather than the conventional at 76 cm can increase yield and nutrient uptake of forage maize. The objective of this study was to determine the effect of row spacing on dry matter yield and content of N, P and K of maize cv. 3025W. The study was carried out in 1999 and 2000 in the Campo Experimental La Laguna near Matamoros, Coahuila, Mexico (25° 32' N, 103° 14' O, and 1150 masl). Four row widths were tested: 38, 50 and 76 cm single row and beds at 105 cm double row, all with 11.2 plants m². A complete random block design with four replications was used. Seed yield, total dry matter, dry matter partitioning, harvest index, LAI and total N, P and K uptake were determined. Dry matter yield obtained with the 38 cm single row and 105 cm double row was higher than the obtained with the conventional single row 76 cm by 14 and 17%, respectively, which was related to a higher LAI and dry matter partitioning to vegetative organs, with no significant reduction of the harvest index. N and K uptake increased 36 and 93 kg ha-1, respectively, in rows at 38 cm as compared with the conventional row spacing, mainly due to a higher dry matter yield per ha. <![CDATA[<b>Biomass and yield of common bean flor de junio type under irrigation and water stress</b>]]> http://www.scielo.org.mx/scielo.php?script=sci_arttext&pid=S0568-25172007000200005&lng=en&nrm=iso&tlng=en En el estado de Zacatecas, México se siembra un promedio anual de 200 000 ha de frijol tipo Flor de Junio con rendimiento de 315 kg ha-1. El bajo rendimiento se debe a que el cultivo se realiza en secano y ocurre sequía intermitente. Se determinó el efecto del contenido de humedad en el suelo sobre la madurez, biomasa del vástago y de raíz, proporción raíz/vástago y rendimiento de cuatro genotipos de frijol. En 2002 se realizaron dos experimentos: uno en macetas de 3 kg en invernadero y otro en campo, en la Unidad de Agronomía de la Universidad Autónoma de Zacatecas. En invernadero se evaluaron cuatro niveles de humedad en el suelo, uno sin sequía y tres niveles de sequía de moderada a severa como sigue: con riego durante el ciclo del cultivo (R) con reposición cada 12 h del 100% de agua evapotranspirada, sequía moderada (SM) con reposición del 75% del volumen de R, sequía severa reposición de 50% de R (SS) y sequía moderada durante la etapa vegetativa y sequía severa durante la etapa reproductiva (SMV+SSR). En campo se evaluaron dos niveles: secano (S) con la aportación pluvial y secano más riego (S+R) con la aportación pluvial más tres riegos. Los tratamientos de sequía tuvieron efecto negativo sobre las características determinadas. En invernadero con el tratamiento SMV+SSR la madurez se redujo en siete días, la biomasa del vástago en 26%, la del sistema radical en 44%, el rendimiento en 5 3 % y la proporción raíz/vástago aumentó con el nivel de sequía. En campo, los genotipos maduraron trece días antes en secano que en S+R y la biomasa del vástago y rendimiento resultaron 34 y 48% menor en secano en comparación con S+R. Con base en la reducción del rendimiento, el índice de susceptibilidad a sequía y la media geométrica, las líneas UAZ-FJ2 y UAZ-FJ3 resultaron resistentes a sequía.<hr/>In the state of Zacatecas, Mexico 200 thousand ha of dry bean Flor de Junio class are annually sown, and its yield average is 315 kg ha-¹. This low yield is due to intermittent drought during the growing season. The objective was to determine the effect of different soil moisture levels on plant maturity, shoot and root dry weight per plant, root-shoot ratio and yield of four bean genotypes. In 2002, two trials were conducted; one under greenhouse conditions and the other in the field at the Unidad de Agronomía of the Universidad Autónoma de Zacatecas. In the greenhouse four soil moisture levels in 3 kg pots were evaluated; one without drought and three from moderate to severe stress: a) irrigated (R), 100% of the evapotranspired water was restituted every 12 h during the cycle, b) moderate drought (SM), 75% of the volume of R was restituted, c) severe drought (SS), 50% of the volume of R was restituted and d) moderate drought during the vegetative stage and severe drought during the reproductive stage (SMV+SSR). In the field, two treatments were tested: rainfed (S), depending on rainfall and rainfed plus supplemental irrigation (S+R), with rainfall, contribution and three irrigations as needed. The stress treatments affected negatively all traits in the genotypes in comparison with R and S+R treatments in greenhouse and field, respectively. In the greenhouse; in comparison to the control (R) the average reductions observed with the SMV+SSR treatment were: seven days to mature, 26% in shoot dry weight, 44% in root dry weight and 53% in yield. The negative effects increased accordingly to the drought level applied, except for root-shoot ratio, which increased with the stress. Under field conditions, the average reductions under the rainfed treatment (S) as compared to (S+R) were: 13 days for maturity, 34% in shoot dry weight and 48% in yield. On the basis of yield reduction, drought susceptibility index and geometric mean of yield, lines UAZ FJ 2 and UAZ FJ 3 resulted drought resistant. <![CDATA[<b>Appropiation of technology by maize growers in the state of Tlaxcala, Mexico</b>]]> http://www.scielo.org.mx/scielo.php?script=sci_arttext&pid=S0568-25172007000200006&lng=en&nrm=iso&tlng=en La tecnología disponible para los cultivos mejora su rendimiento y calidad si se utiliza en forma adecuada. El objetivo de esta investigación fue desarrollar una metodología para identificar y evaluar factores limitantes del uso y aplicación de la tecnología recomendada por el Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP), para la producción de maíz en el estado de Tlaxcala, México. La investigación se realizó en agosto de 2002 en los 60 municipios del estado. Se encuestaron 18 84 productores de maíz seleccionados al azar, se preguntó sobre prácticas agronómicas, rendimiento, y aspectos económicos y sociológicos: familiares y comunitarios. Se elaboró un índice de apropiación de tecnología de 0 a 100 unidades: 0 correspondió a los productores que no utilizan la tecnología recomendada y 100 a quienes la utilizan y aplican total y adecuadamente. Con base en los resultados de la encuesta se tipificó a los productores de acuerdo al valor del índice obtenido como: de muy baja, baja, media y alta apropiación. El 73% de los productores se clasificaron como de baja apropiación y solo 1.5% de alta. Se observó una relación directa entre índice de apropiación y rendimiento; sin embargo, solo un tercio de la tecnología fue utilizada por los productores. Los principales factores que limitan el uso y la aplicación correcta de la tecnología fueron: acceso limitado a factores de la producción, relevancia de las prácticas tradicionales, desempeño de otras actividades complementarias, bajos ingresos, migración y escasa asesoría técnica. El concepto de apropiación de tecnología agrícola, la técnica de índice de apropiación y el instrumento analítico de tipología de productores, articularon la secuencia metodológica empleada en esta investigación.<hr/>Correctly applied, the technology available for maize production can increase yield. The objective of this research was to develop a methodology for evaluating and identifying the main factors that restrict the use and the proper application of the technology recommended by Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP) for maize production in the state of Tlaxcala, Mexico. In august 2002, a survey was carried out throughout the 60 counties of the state on 18 84 maize growers randomly chosen, in order to know their agronomic practices and economic and sociological status of their families and communities. A technology appropriation index was constructed with a scale from 0 to 100 units, in which 0 corresponded to the growers with no use of the recommended technology at all and 100 to those that use it all and do applied it properly. With the data from the survey, the maize growers were classified as of : very low, low, medium, high and very high appropriation level. The results showed that 73% of the farmers were at the low appropriation level and only 1.5% at the high level. A direct relationship between the appropriation level and yield was found; however, only one third of the available technology was used. The main factors that restrict the use of technology and its proper application were: restricted access to the production elements, relevance of traditional practices, complementary activities, low income, migration and lack of technical assistance. The technology appropriation concept, the appropriation index and the typology of the farmers as an analysis tool, articulated the methodological sequence utilized in this research. <![CDATA[<b>Seed yield of male sterile and normal fertiles progenitors of maize hybrids</b>]]> http://www.scielo.org.mx/scielo.php?script=sci_arttext&pid=S0568-25172007000200007&lng=en&nrm=iso&tlng=en El uso de la androesterilidad es una opción viable para reducir costos de producción de semilla de híbridos de maíz. Investigadores del Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP) y la Universidad Nacional Autónoma de México (UNAM), se dieron a la tarea de introducir el gen de androesterilidad a progenitores de híbridos de maíz e identificaron algunas líneas con capacidad restauradora de la fertilidad en 1992. Como objetivo de este estudio, se evaluaron seis cruzas simples androestériles y sus respectivas versiones fértiles en el ciclo primavera-verano de 2000. Se estableció un experimento en El Batán, Estado de México, México y Tula, Hidalgo, con un diseño experimental de bloques completos al azar con tres repeticiones. La característica de esterilidad se verificó usualmente durante el período de floración. No se observó diferencia en rendimiento de semilla entre las cruzas androestériles y su versión fértil. Las cruzas androestériles produjeron mayor porcentaje de semillas grandes y en la mayoría de los casos mayor peso de 100 semillas. Se confirmó la androesterilidad de las cruzas.<hr/>To reduce production costs maize seed multiplication, the use of male sterility is a viable option. Researchers at the National Research Institute for Forestry, Agriculture and Livestock (INIFAP) and the National Autonomous University of Mexico (UNAM), introduced a male sterile gene since 1992 have been pursuing the introduction of this that into maize lines and in the search for fertility restoring lines. The objective of this study was to evaluate seed production and quality of male sterile single crosses and to compare them with their fertile version. The experiment was established at El Batan, State of Mexico, Mexico and Tula, Hidalgo, in a complete randomized block design with three replicates. During the flowering period the sterility trait was visually verified. No difference in seed production was observed between male sterile and normal versions of the crosses. Male sterility increased the percentage of large seeds and in the majority of the crosses the 100 seed weight. The male sterility trait was confirmed on all simple crosses. <![CDATA[<b>Integral program to reduce post-harvest losses in maize</b>]]> http://www.scielo.org.mx/scielo.php?script=sci_arttext&pid=S0568-25172007000200008&lng=en&nrm=iso&tlng=en Las pérdidas poscosecha por plagas de maíz plantean un grave problema en países en desarrollo, en especial para los agricultores de escasos recursos. Se ha reportado que en las regiones tropicales las pérdidas ascienden hasta en 40%. El objetivo del presente trabajo fue proponer un programa integral para disminuir las pérdidas poscosecha de grano de maíz, con base en cinco actividades multidisciplinarias: a) cuantificar y cartografiar las pérdidas poscosecha en México e identificar las plagas que las causan, b) desarrollar variedades resistentes a plagas de almacén, c) implementar nuevos métodos de evaluación de resistencia a plagas, d) mejorar las prácticas tradicionales para la conservación del grano y e) transferir mejores prácticas de almacenamiento y conservación a los productores. Se revisaron los avances y logros de investigación en cada una de las cinco actividades. Cada una contribuye a disminuir la pérdida poscosecha de maíz de entre 10 y 30%. En conjunto, el uso de variedades resistentes a plagas de almacén, estructuras de almacenamiento apropiadas y correcto acondicionamiento de grano podrían disminuir la pérdida poscosecha hasta en 60%. El programa integral puede ajustarse para enfrentar las condiciones socioeconómicas y ambientales de cada región.<hr/>Maize post-harvest losses associated with storage pests pose a serious problem, particularly for low-income farmers in developing countries. Grain weight losses of up to 40% have been reported in tropical regions. The objective of the present work was to propose an integral program oriented to reduce post-harvest losses in maize, based on five multidisciplinary activities: a) quantify and map post-harvest losses in Mexico and identify the responsible storage pests, b) development of maize varieties resistant to storage pests, c) implement new methodologies for the evaluation of pest resistance, d) improve traditional and recommended grain storage practices and e) transfer the grain conservation practices to farmers. The research advances and achievements of the five proposed activities were reviewed. Individually, each activity reduces grain loss from 10 to 30%. As a whole, the use of storage pests resistant cultivars, the use of appropriate storage structures and the proper conditioning of the grain, can reduce postharvest grain losses up to 60%. The integral program can be adapted to meet the diverse socioeconomic status and prevalent climate across regions. <![CDATA[<b>Fruit production and productivity indexes of guava trees</b>]]> http://www.scielo.org.mx/scielo.php?script=sci_arttext&pid=S0568-25172007000200009&lng=en&nrm=iso&tlng=en El guayabo (Psidium guajava L.) es uno de los principales frutales que se cultivan en México, con una superficie de 24 000 ha y un volumen de producción anual de 300 000 t. Se determinó la producción de fruto fresco de 24 selecciones de guayabo durante 1999-2002 en Huanusco, Zacatecas, México, así como su relación con dos índices de productividad: volumen de copa y área transversal de tallo. El objetivo fue identificar características adecuadas para evaluar la productividad de germoplasma criollo y mejorado de guayabo. Todos los materiales evaluados fueron identificados y seleccionados en la región de Calvillo-Cañones, en los estados de Aguascalientes y Zacatecas, México. La producción de fruto varió de 34 a 73 kg árbol-1, mientras que el número promedio de frutos por árbol varió de 551 a 1514. Las selecciones más productivas fueron la 11, 106, 126, 12 y 47. Entre las más vigorosas destacaron la 118, 106, 115, 117 y 42. Se observó asociación positiva entre producción de fruto e índices de productividad.<hr/>Guava (Psidium guajava L.) is one of the main fruit trees cultivated in Mexico, with a production area of 24 000 ha and annual production of 3 00 000 t. Fresh fruit production of 24 guava selections grown in Huanusco, Zacatecas, Mexico was recorded during 1999-2002, and then related to two productivity indexes: productivity index based on canopy volume and productivity index based on stem cross sectional area. This work was conducted in order to identify useful traits that can be used for the evaluation of productivity in landraces and breed guava germplasm in Mexico. All evaluated materials were identified and selected in the Calvillo-Cañones region. Fruit production ranged from 34 to 73 kg tree-¹, while the average number of fruits per tree was from 551 to 1514. Selections with greatest number of fruits were 11, 106, 126, 12, and 47. The most vigorous accessions were 118, 106, 115, 117, and 42. Positive associations between fruit production and productivity indexes were found. <![CDATA[<b>Negro papaloapan, a new bean cultivar for the tropical areas of Veracruz and Chiapas, Mexico</b>]]> http://www.scielo.org.mx/scielo.php?script=sci_arttext&pid=S0568-25172007000200010&lng=en&nrm=iso&tlng=en El guayabo (Psidium guajava L.) es uno de los principales frutales que se cultivan en México, con una superficie de 24 000 ha y un volumen de producción anual de 300 000 t. Se determinó la producción de fruto fresco de 24 selecciones de guayabo durante 1999-2002 en Huanusco, Zacatecas, México, así como su relación con dos índices de productividad: volumen de copa y área transversal de tallo. El objetivo fue identificar características adecuadas para evaluar la productividad de germoplasma criollo y mejorado de guayabo. Todos los materiales evaluados fueron identificados y seleccionados en la región de Calvillo-Cañones, en los estados de Aguascalientes y Zacatecas, México. La producción de fruto varió de 34 a 73 kg árbol-1, mientras que el número promedio de frutos por árbol varió de 551 a 1514. Las selecciones más productivas fueron la 11, 106, 126, 12 y 47. Entre las más vigorosas destacaron la 118, 106, 115, 117 y 42. Se observó asociación positiva entre producción de fruto e índices de productividad.<hr/>Guava (Psidium guajava L.) is one of the main fruit trees cultivated in Mexico, with a production area of 24 000 ha and annual production of 3 00 000 t. Fresh fruit production of 24 guava selections grown in Huanusco, Zacatecas, Mexico was recorded during 1999-2002, and then related to two productivity indexes: productivity index based on canopy volume and productivity index based on stem cross sectional area. This work was conducted in order to identify useful traits that can be used for the evaluation of productivity in landraces and breed guava germplasm in Mexico. All evaluated materials were identified and selected in the Calvillo-Cañones region. Fruit production ranged from 34 to 73 kg tree-¹, while the average number of fruits per tree was from 551 to 1514. Selections with greatest number of fruits were 11, 106, 126, 12, and 47. The most vigorous accessions were 118, 106, 115, 117, and 42. Positive associations between fruit production and productivity indexes were found. <![CDATA[<b>H-440, new drought tolerant maize hybrid for northern Mexico</b>]]> http://www.scielo.org.mx/scielo.php?script=sci_arttext&pid=S0568-25172007000200011&lng=en&nrm=iso&tlng=en El guayabo (Psidium guajava L.) es uno de los principales frutales que se cultivan en México, con una superficie de 24 000 ha y un volumen de producción anual de 300 000 t. Se determinó la producción de fruto fresco de 24 selecciones de guayabo durante 1999-2002 en Huanusco, Zacatecas, México, así como su relación con dos índices de productividad: volumen de copa y área transversal de tallo. El objetivo fue identificar características adecuadas para evaluar la productividad de germoplasma criollo y mejorado de guayabo. Todos los materiales evaluados fueron identificados y seleccionados en la región de Calvillo-Cañones, en los estados de Aguascalientes y Zacatecas, México. La producción de fruto varió de 34 a 73 kg árbol-1, mientras que el número promedio de frutos por árbol varió de 551 a 1514. Las selecciones más productivas fueron la 11, 106, 126, 12 y 47. Entre las más vigorosas destacaron la 118, 106, 115, 117 y 42. Se observó asociación positiva entre producción de fruto e índices de productividad.<hr/>Guava (Psidium guajava L.) is one of the main fruit trees cultivated in Mexico, with a production area of 24 000 ha and annual production of 3 00 000 t. Fresh fruit production of 24 guava selections grown in Huanusco, Zacatecas, Mexico was recorded during 1999-2002, and then related to two productivity indexes: productivity index based on canopy volume and productivity index based on stem cross sectional area. This work was conducted in order to identify useful traits that can be used for the evaluation of productivity in landraces and breed guava germplasm in Mexico. All evaluated materials were identified and selected in the Calvillo-Cañones region. Fruit production ranged from 34 to 73 kg tree-¹, while the average number of fruits per tree was from 551 to 1514. Selections with greatest number of fruits were 11, 106, 126, 12, and 47. The most vigorous accessions were 118, 106, 115, 117, and 42. Positive associations between fruit production and productivity indexes were found.